MCF
The innovative, magnetically coupled driving technology that moves the cleaning disc – without the need for shaft or drive external seals – makes MCF magnetically coupled filter unique.
Specification:
• Single Unit Weight: 200 lbs (91 kg)
• Service Height: 64 in. (1,626 mm)
• Footprint: 19.6 in. (498 mm) x 18 in. (457 mm)
• Volumetric Capacity: 11 gal (41.6 l) total
• Purge Chamber: 1.3 gal (5 l) capacity
• Connections: Standard: 3 in (75 mm) I/O NPTE thread, 2 in (50 mm) NPTI purge
• Connections: Optional: 150# RFSO flanged, Sanitary, DIN (PM16) flanged, or BSPT — and purge valve options and more
• Filtration Surface Area: 601 in² (3935 cm²)
• Media: Wedge wire: 15µm–1125µm, or defined pore: 25µm–100µm
• Screen: Diameter: 8 in (203 mm), Length: 24 in. (610 mm), Area: 610 in² (3935 cm²)
• Flow Rate Range: 30–200 gpm (6.8–45.4 m³/hr)
• Temperature, maximum: 180 °F (82 °C)
• Operating Pressure: 30–150 psi (2–10.5 bar)
• Elastomer Seal: Optional: EPT/EPDM (Nordel) or Viton
• Cleaning Disc: Standard: Delrin – optional: High-Density Polyethylene
• Housing/Wetted Parts Materials: Standard: 316 stainless steel
• Controllers: Standard: continuous cleaning valve (CCV)
• Controller Options: Push button, semi-automatic electric, electric timer, PLC
• Air for Actuator Drive (clean, dry, non lubricated air): 80 psi (5.5 bar) at 5 cfm (140 m³/m)
• Electrical for Controllers: (if equipped with optional electric automatic control timer): 110 or 220 Volt, 50 or 60 Hz, single-phase
• Service Height: 64 in. (1,626 mm)
• Footprint: 19.6 in. (498 mm) x 18 in. (457 mm)
• Volumetric Capacity: 11 gal (41.6 l) total
• Purge Chamber: 1.3 gal (5 l) capacity
• Connections: Standard: 3 in (75 mm) I/O NPTE thread, 2 in (50 mm) NPTI purge
• Connections: Optional: 150# RFSO flanged, Sanitary, DIN (PM16) flanged, or BSPT — and purge valve options and more
• Filtration Surface Area: 601 in² (3935 cm²)
• Media: Wedge wire: 15µm–1125µm, or defined pore: 25µm–100µm
• Screen: Diameter: 8 in (203 mm), Length: 24 in. (610 mm), Area: 610 in² (3935 cm²)
• Flow Rate Range: 30–200 gpm (6.8–45.4 m³/hr)
• Temperature, maximum: 180 °F (82 °C)
• Operating Pressure: 30–150 psi (2–10.5 bar)
• Elastomer Seal: Optional: EPT/EPDM (Nordel) or Viton
• Cleaning Disc: Standard: Delrin – optional: High-Density Polyethylene
• Housing/Wetted Parts Materials: Standard: 316 stainless steel
• Controllers: Standard: continuous cleaning valve (CCV)
• Controller Options: Push button, semi-automatic electric, electric timer, PLC
• Air for Actuator Drive (clean, dry, non lubricated air): 80 psi (5.5 bar) at 5 cfm (140 m³/m)
• Electrical for Controllers: (if equipped with optional electric automatic control timer): 110 or 220 Volt, 50 or 60 Hz, single-phase
